In this post we will try to shed some light on the question “What is the best type of laser to use?”

What Is Laser Marking?

by Jim Earman on Tue, Aug 06, 2013 @ 08:00 AM

Generally speaking, laser marking is performed using one of two laser types and one of two types of laser positioning...

The basic components of a steered beam, fiber laser marking system consist of the following:

Both fiber lasers and YAG lasers produce laser light at a wavelength of approximately 1.06 microns (1064 nm)...

There are no user serviceable parts and there is absolutely no laser maintenance or consumables associated with fiber...

How fast can I laser mark a part?

by Jim Earman on Thu, Jun 09, 2011 @ 10:49 AM

Laser marking job shops get their business from clients that either don't have sufficient parts volume to justify owning...

What is the cost of a laser system?

by Jim Earman on Thu, Jun 09, 2011 @ 08:13 AM

There is no such thing as a cheap, low end laser marker unless the components themselves are cheap and low end...

Laser marking is like burning leaves with a magnifying glass...

Why Jimani Uses Prolase Laser Marking Software

by Jim Earman on Wed, Jun 08, 2011 @ 12:34 PM

There are three or four good laser marking software packages on the market. They are all pretty versatile and complete....